After setting the parameters as required press [ENTER] to execute the Extract Event job. The metronome icon will appear on the display while the data is being processed, then “Completed” will appear briefly when the job is done. Press the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.
12: Thin Out“Thins out” specified types of data by removing every other event of the specified type. This is particularly useful for reducing the volume of data required for pitch bends, aftertouch and other control change operations, thus making more efficient use of the available memory.
The “TR” parameter selects the track to be affected by the Thin Out job: “01”
... “16” for the sequencer tracks, or “Tmp” for the tempo track.
The “M” parameters above the graphic bar are used to specify the first measure:beat and last measure:beat of the range to be modified.
The data type parameter determines the type of data to be thinned.
P.BEND Pitch bend events.
CTRL Control change events. When this event type is selected a control change number parameter appears to the right of the type param- eter. The control change parameter determines the MIDI control change number(s) to be thinned: “000” ... “127”.
CH A.T Channel aftertouch events.
POLY A.T Polyphonic aftertouch events.
After setting the parameters as required press [ENTER] to execute the Thin
Out job. The metronome icon will appear on the display while the data is being
processed, then “Completed” will appear briefly when the job is done. Press
the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.
47