Select the Starting Style, Section, Chord, & Tempo

Move the cursor to the style number, section, chord, and tempo parameters, and set as required.

It’s sometimes easier to set a slow tempo for realtime recording, so you

have plenty of time to enter pattern and chord changes.

Engage the Record Ready Mode

Press the key to engage the record ready mode. The red LED above the

key will light.

Select the Realtime Record Mode

Press the [F4] function key (“REAL”) to select the realtime record mode.

Record

Press the key to begin recording pattern changes. The metronome will sound and you’ll be given a two-measure count-in prior to the first measure actually recorded. The count-in is also indicated by negative numbers in the “Meas” parameter. If a 4/4 pattern is selected, for example, the count-in will run from measure “-08” to “-01”, then recording will begin from measure “001”.

Since you selected “Pat” recording, the cursor will automatically move to the style number when you start recording. All you have to do to record style and section changes is to select the required style numbers by using any data entry method, and section changes via the appropriate micro-keyboard keys. Remember that all style and section changes occur from the top of the next measure after the change is entered. Also keep in mind that the INTRO will automatically switch to the MAIN A pattern, FILL AB will automatically switch to the MAIN B pattern, and FILL BA will automatically switch to the MAIN A pattern.

66