The “Range” parameter determines the range of velocity values over which the crescendo will occur. A setting of “+24”, for example, will cause the MIDI velocity values to increase by 24 over the specified measure range (The MIDI velocity value range is from 0 to 127).

Negative values cause a corresponding decrease in velocity, therby producing a decrescendo rather than a crescendo. The range of this parameter is from “- 99” through “0” to “+99”.

After setting the parameters as required press [ENTER] to execute the Crescendo job. The metronome icon will appear on the display while the data is being processed, then “Completed” will appear briefly when the job is done. Press the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.

05: Transpose

Transposes all notes in the specified user phrase up or down by the specified number of semitones.

The “Phrase” parameter selects the user phrase to be affected by the Transpose job: “001” ... “100”.

The “Transpose” parameter determines the amount of transposition in semitone increments. Minus (-) values transpose down while plus (+) values transpose up. the range is from “-99” through “0” to “+99”.

After setting the parameters as required press [ENTER] to execute the Transpose job. The metronome icon will appear on the display while the data is being processed, then “Completed” will appear briefly when the job is done. Press the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.

97