Parameter Settings
Setting Parameters with the Jog Dial ■ Interior Menu
9. Save As Alarm
SaveAs Alarm | ∞ |
OK
Saves the performance data (active notes and settings) in the current block for use as the
alarm that will play during Interior Mode operation.
●If you use this function to change the alarm, the original default alarm will be erased. To restore the original alarm use the Factory Reset function.
After selecting the block containing the data you want to save as the alarm, press the [OK] button while this display is showing to save the data as the alarm.
●Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK] button) if you want to cancel the operation.
If you press the [OK] button to execute the operation, "Saving …" will appear on the display
while the data is being saved.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the "Saving…" display is showing.
■Range . . . . . . . . . . . . OK, CANCEL
■Default . . . . . . . . . . . OK
■LED Buttons . . . . . . . No display
10. Clock Adjust
Clock Adjust |
| ∞ | |
Year:20 | 07 |
|
|
Day :01/01 |
| ||
Time:12:00:00 |
| ||
Sets the clock year, month, day, and time.
Press the [OK] button after setting each parameter to highlight the next parameter. Pressing the [OK] button after the last parameter has been set applies the new clock settings.
■Range . . . . . . . . . . . . Year: 2000 — 2099
Month & Day: 01 — 12/01 — 31
Time: 00 — 23/00 — 59 *Seconds cannot be adjusted.
■Default . . . . . . . . . . . OK
■LED Buttons . . . . . . . No display