Parameter Settings

Setting Parameters with the Jog Dial Data Storage and Initialization

Data Storage and Initialization

Data that is Erased When the Power is Turned Off

■All block set

All active notes and settings for all layers and blocks are not retained in memory when the power is turned off, so if you want to keep any active notes data you have created you will need to use the Save All Blocks function described on Page 69 to save it to an SD Memory Card.

■Data Listed as "Save as Default" in the "Backup" Column of the Chart Below

These items are not retained in memory when the power is turned off, but can be saved to the internal flash ROM as the default settings by using the Save As Default function described on Page 106. Settings saved in this way become the power-on default settings.

Items listed as "Automatic Backup" in the "Backup" column of the chart are automatically saved as the power-on default settings whenever a change is made.

Initialization

The entire system can be restored to the factory default settings by using the Factory Reset function described on Page 108. To reset all active notes and settings for all layers and blocks, use the Reset All Blocks function described on Page 58.

All data will be erased when the Factory Reset function is executed. Be sure to save any data you want to keep to an SD Memory Card beforehand.

All layer and block data will be erased when the Reset All Blocks function is executed. Be sure to save any data you want to keep to an SD Memory Card beforehand.

Menu Settings

Parameter

 

 

Backup

Factory Default

Play Menu

Hardware Volume

Automatic Backup

96

 

 

 

 

 

Master Tempo

 

75

 

 

 

 

 

Master Scale

Save As Default

lonian

 

 

 

 

 

Master Transpose

 

0

 

 

 

 

 

 

 

 

Cannot be backed up.

 

 

 

 

But since this setting is

 

 

 

 

related to the Layer menu

 

 

Master Loop Speed

Loop Speed parameter, it

4

 

 

 

can be saved as the default

 

 

 

 

layer setting by using the

 

 

 

 

Save As Default function.

 

 

 

 

 

 

 

 

TOP

Cannot be backed up.

1

 

 

 

But since this setting is

 

 

 

 

 

 

 

 

related to the Loop Point

 

 

Master Loop Point

 

settings accessed via the

 

 

END

function buttons, it can be

16

 

 

 

 

 

saved as the default layer

 

 

 

 

setting by using the Save As

 

 

 

 

Default function.

 

 

 

 

 

 

 

Reset Loop Timing

Cannot be backed up.

OK

 

 

 

 

 

Mute

Save As Default

OFF

 

 

 

 

 

TENORI-ON Manual 39