Parameter Settings
Setting Parameters with the Jog Dial ■ File Menu
6Press the [OK] button to load the selected file.
The display shown below will appear while the file is being loaded. Press the [OK] or [CANCEL] button to cancel the load operation.
Current Layer Number
Layer[01]: ∞
Loading... CANCEL
The name of the Current Layer file being loaded.
7When the Current Layer file has been loaded the display shown in step 3, above, will appear, and playback of the Current Layer file will begin.
Press the [OK] button in the status display when you want to stop playback.
●Save Current Layer
Saves a Current Layer file containing all active notes and settings such as voice, tempo, etc., for the current layer in the current block to an SD Memory Card.
1Insert an SD Memory Card that has sufficient free space for the file to be saved into the
2Use the jog dial and [OK] button to navigate to the Current Layer function menu as follows:
"Main menu" ➝ "File menu" ➝ "Current Layer"
Layer[01]: ∞
Operation: Load
3Use the jog dial to highlight the "Save" function, then press the [OK] button.
Layer[01]: ∞
Operation: Save
4The file name entry display will appear. A default file name will be provided, which you can either use
File name entry procedure is described in the Rename Song section on Page 65.
●File names can be up to 16 characters in length. The file extension will be added automatically.
Current Layer File Name
Available Characters
Input File Name |
| ∞ | |||||
|
| ] |
| ||||
|
|
| |||||
ABCDEFGHIJKLMNOPQRST |
|
| |||||
UVWXYZ- | 0123456789 | ª | § |
| |||
| |||||||
|
|
|
|
|
|
|
|
Input Cursor
Set File Name
Backspace & Delete 1 Character