Parameter Settings
Setting Parameters with the Function Buttons [R5] Block Number
[R5] Block Number
Switches to a different block.
When the [R5] button is pressed the LED button column corresponding to the currently selected bock will light. The leftmost column corresponds to block 1 and the rightmost column corresponds to block 16.
While holding the [R5] button slide your finger horizontally over the matrix or simply press an LED button in the appropriate column to select the desired block.
●When switching blocks while in the Push Mode the active notes will be retriggered (i.e. they will play from the beginning again).
●When switching blocks while in the Random Mode, Bounce Mode, the loop point will return to the beginning of the loop in either of the cases listed below:
•The block that is switched to is not operating in one of the three modes listed above.
•The block that is switched to includes one or more notes in different positions from the current block.
■Range . . . . . . . . . . . . 1 — 16
■Default . . . . . . . . . . . 1