Parameter Settings

Setting Parameters with the Jog Dial ■ File Menu

6When the All Blocks file has been loaded the display shown in step 2, above, will appear, and playback of the All Blocks file will begin.

Press the [OK] button in the status display when you want to stop playback.

●Save All Blocks

Saves an All Blocks file containing all active notes and settings such as voice, tempo, etc., for all layers and blocks to an SD Memory Card.

1

2

Insert an SD Memory Card that has sufficient free space for the file to be saved into the TENORI-ON card slot.

Use the jog dial and [OK] button to navigate to the All Blocks function menu as follows: "Main menu" ➝ "File menu" ➝ "All Blocks"

All Blocks

∞

Operation: Load

3Use the jog dial to highlight the "Save" function, then press the [OK] button.

All Blocks

∞

Operation: Save

The file name entry display will appear. A default file name will be provided, which you can either use as-is or replace with a name of your own.

File name entry procedure is described in the Rename Song section on Page 65.

Current All Blocks File Name

Available Characters

Input File Name

 

∞

 

[0302E-BLOCKS-02

 

]

 

 

 

 

ABCDEFGHIJKLMNOPQRST

 

 

UVWXYZ-

0123456789

ª

§

 

 

 

 

 

 

 

 

 

 

Input Cursor

Set File Name

Backspace & Delete 1 Character

4When the file name has been entered as required use the jog dial to highlight the "§" symbol in the lower right corner of the display and press the [OK] button.

The file name will be entered and the save function will be executed.

A display like the one shown below will appear while the All Blocks file is being saved. You can cancel the operation by pressing the [OK] or [CANCEL] button.

Blocks: ∞ "1-BLOCKS1020-01 "

Saving... CANCEL

The name of the All Blocks file being saved.

File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the "Saving…" display is showing.

TENORI-ON Manual 69