73
Operation: Load
4 Use the jog dial to highlight the "Load" function, then press the [OK] button.
5 Current Block files on the card will appear as a list on the LCD display (with no file extension). Use the jog dial to select the file you want to load.
Block[01]: Load ∞
● Only files that are in Current Block format will be displayed.
6 Press the [OK] button to load the selected file.
The display shown below will appear while the file is being loaded. Press the [OK] or [CANCEL] button to cancel the load operation.
Block[01]:
∞
● Load Current Block
Loads a Current Block file that has been saved to an SD Memory Card into the TENORI-ON.
When a block is loaded the layer settings for all other blocks will also be overwritten by the loaded data.
1 Make sure the block that you want to load the data into is selected on the TENORI-ON (Function Button [R5]: Page 34).
2 Insert the SD Memory Card containing the file you want to load into the TENORI-ON card slot.
3 Use the jog dial and [OK] button to navigate to the Current Block function menu as follows:
"Main menu" ➝ "File menu" ➝ "Current Block"
Current Block Number
Delete Current Block
Rename Current Block
Save Current Block
Load Current Block
3. Current Block
Provides access to Current Block file operations.
"Current Block" files include active notes and settings such as voice, tempo, etc., for all layers in the current block.
The following 4 Current Block file functions are provided:
Setting Parameters with the Jog Dial
■ File Menu
Parameter Settings