Parameter Settings
Setting Parameters with the Jog Dial ■ Edit Menu
4. Clear this Layer
Current Block Number
Current Layer Number (the layer to be cleared)
Clear this Layer 
∞
Block[01] Layer[01]
OK
Clears all active notes from the current block and layer. This produces the same result as briefly pressing the [CLEAR] button.
Rotate the jog dial to display "OK" if it isn’t already showing, then press the [OK] button. To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to display "CANCEL" and press the [OK] button.
●This function clears the active notes, but leaves Random Mode rotation data unaffected and active. The LED buttons can not be used to enter notes while rotation is active. Refer to Rotation (➝ Page 28) for information on stopping rotation.
■Range . . . . . . . . . . . . OK, CANCEL
■Default . . . . . . . . . . . OK
■LED Buttons . . . . . . . Animation displayed when clear executed
5. Clear All Blocks
Clear All Blocks ∞
OK
Clears all active notes from all blocks and layers. This produces the same result as pressing the [CLEAR] button (long press).
Rotate the jog dial to display "OK" if it isn’t already showing, then press the [OK] button. To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to display "CANCEL" and press the [OK] button.
■Range . . . . . . . . . . . . OK, CANCEL
■Default . . . . . . . . . . . OK
■LED Buttons . . . . . . . Animation displayed when clear executed