Parameter Settings

Setting Parameters with the Jog Dial ■ File Menu

5Press the [OK] button to go to the file name entry display. The name of the currently selected file will be displayed, and you can enter a new file name as required.

Current Song File Name

Available Characters

Input File Name

 

 

∞

[0302E-SONG-02

 

 

]

 

ABCDEFGHIJKLMNOPQRST

 

 

UVWXYZ-

0123456789

ª

§

 

 

 

 

 

 

 

 

 

 

Input Cursor

Set File Name

Backspace & Delete 1 Character

The Input cursor "œ" indicates the current entry point in the file name displayed on the second line of the LCD. Use the jog dial to highlight the character you want to enter in the list on the third and fourth lines of the LCD, then press the [OK] button to enter that character at the current entry point. When a character is entered the cursor moves one character to the right, ready for the next character. If you want to enter a new character in the middle of the file name, you will need to delete and re-enter all characters up to that point.

To delete characters, use the jog dial to highlight the "ª" symbol in the lower right corner of the display and press the [OK] button as many times as necessary.

File names can be up to 16 alphanumeric and hyphen (-) characters in length, not including the file extension. The file extension will be added automatically.

Input File Name

 

 

∞

[0302E-SONG-02

 

 

]

 

 

ABCDEFGHIJKLMNOPQRST

UVW

X

YZ-0123456789

ª§

Input Cursor

Character Selected for Input

Input File Name

 

 

∞

[0302E-SONG-02X

 

 

]

 

 

ABCDEFGHIJKLMNOPQRST

UVW

X

YZ-0123456789

ª§

Cursor Moves 1 Character After Input

6When the file name has been entered as required use the jog dial to highlight the "§" symbol in the lower right corner of the display and press the [OK] button. "Executing …" will appear on the display while the file is being renamed.

File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the "Executing…" display is showing.

●If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the one shown below will appear.

Song: ∞

"1-ORIGINAL-001 "

Already Exists!

Overwrite? OK

●Press the [OK] button if it’s OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the original file unaltered.

7The display shown in step 3, above, will reappear when the operation has finished.

TENORI-ON Manual 66