The
Performance Modes Solo Mode
Solo Mode
The Solo Mode is assigned to layer 16.
Solo Mode Operation
Press an LED button and the corresponding note will repeat until the button is released. The LEDs in a column in which an LED button is pressed will flash upwards.
In the solo mode the pitches are arranged horizontally, like a piano. The vertical axis sets the interval between repeats: you can change the interval between repeats easily by pressing or sliding your finger to a lower (longer) or higher (shorter) LED button in the column.
If a sustained voice is used the note will sound for as long as the button is held.
[Reference]
❊The note length (gate time) can be changed as required. (Sound Length ➝ Page 25, 52)
❊The interval between repeats can be adjusted by changing the loop speed. The repeat interval of the top row of LED buttons is 1/2 the loop speed, and the interval doubles for each row down the matrix. (Loop Speed ➝ Page 29, 51. Master Loop Speed ➝ Page 45).
The factory default scale for the horizontal axis is an ionian scale, corresponding to the white keys on a piano, with the lowest pitch on the left and the highest on the right.
[Reference]
❊Selecting a scale other than the ionian scale. (Master Scale ➝ Page 44)
❊Changing octaves. (Octave ➝ Page 26)
❊Note timing in the Solo Mode will be synchronized to the Score Mode. (Quantize ➝ Page 60)