Parameter Settings

Setting Parameters with the Function Buttons [R4] Volume

[R4] Volume

Layer Volume

Allows the volume of each layer to be adjusted as required (layer volume common to all blocks).

When the [R4] button is pressed the current volume settings for all 16 layers are displayed on the LED button matrix. Each row of LED buttons corresponds to layer, beginning with layer 01 at the bottom row.

While holding the [R4] button slide your finger horizontally over the row corresponding to the layer you want to adjust to set the volume as required. Moving a setting to the right increases the volume of the corresponding layer.

Master Volume

You can also use the jog dial while holding the [R4] button to set the master volume level (all layers). The master volume value appears on the LCD display only.

■Range . . . . . . . . . . . . Layer volume: 0 — 127 Master volume: 0 — 127

■Default . . . . . . . . . . . Layer volume: 96 (all layers) Master volume: 96

set via the LED buttons.

●To adjusts the instrument's basic volume level, refer to Hardware Volume (➝ Page 43).

[Reference]

❊Layer menu/Volume (➝ Page 50)

TENORI-ON Manual 33