Parameter Settings

Setting Parameters with the Jog Dial File Menu

5Click the [EXIT] button to quit the software.

6Insert the SD Memory Card to which the file was saved in step 4, above, into the TENORI-ON card slot.

7Load the file from the SD Memory Card into a user memory. Refer to "Load Samplings" on Page 93 for details.

User voice setup is now complete.

8Play the user voice.

You can now select the user voice by pressing the corresponding LED button while holding the [L1] button, in the same way as you select the internal voices.

Octave, transpose, and scale settings do not affect the user voices.

User voices are retained in memory even when the TENORI-ON is turned off.

In order to play a song that uses a user voice on a different TENORI-ON, the user voice file must first be loaded into the TENORI-ON on which the song is to be played ("Save Samplings" on Page 94, and "Load Samplings" on Page 93).

TENORI-ON Manual 92