Parameter Settings

Setting Parameters with the Function Buttons [R3] Master Transpose

[R3] Master Transpose

Adjusts the playback pitch in semitone increments for all layers and all blocks.

When the [R3] button is pressed the LED button row corresponding to the currently selected transpose value will light. While holding the [R3] button slide your finger vertically over the matrix or simply press an LED button in the appropriate row to select the desired degree of transposition.

The eighth row from the bottom produces no transposition (a "0" setting). Each row above that shifts the pitch up by the corresponding number of semitones up to "+8", while each row below that lowers the pitch by the corresponding number of semitones down to "-7".

●Changes will not be applied to notes that are already playing in the Push or Solo modes, or currently playing notes if a long Sound length has been specified.

■Range . . . . . . . . . . . . -7 — +8 (semitone increments)

■Default . . . . . . . . . . . 0

+8 +7 +6 +5 +4 +3 +2 +1

0 -1 -2 -3 -4 -5 -6 -7

Master Transpose ∞

+1

[Reference]

❊Play menu/Master Transpose (➝ Page 45)

TENORI-ON Manual 32