Parameter Settings

Setting Parameters with the Jog Dial ■ File Menu

6When the All Settings file has been loaded the display shown in step 2, above, will appear, and playback of the existing active notes will begin using the All Settings data just loaded.

Press the [OK] button in the status display when you want to stop playback.

●Save All Settings

Saves an All Settings file containing all settings such as voice, tempo, etc., for all layers and blocks to an SD Memory Card. Active notes are not included.

1

2

Insert an SD Memory Card that has sufficient free space for the file to be saved into the TENORI-ON card slot.

Use the jog dial and [OK] button to navigate to the All Settings function menu as follows: "Main menu" ➝ "File menu" ➝ "All Settings"

All Settings: ∞

Operation: Load

3Use the jog dial to highlight the "Save" function, then press the [OK] button.

All Settings: ∞

Operation: Save

4The file name entry display will appear. A default file name will be provided, which you can either use as-is or replace with a name of your own.

File name entry procedure is described in the Rename Song section on Page 65.

●File names can be up to 16 characters in length. The file extension will be added automatically.

Current All Settings File Name

Available Characters

Input File Name

 

 

∞

 

[0302E-SET-02

 

 

]

 

 

 

 

 

ABCDEFGHIJKLMNOPQRST

 

 

UVWXYZ-

0123456789

ª

§

 

 

 

 

 

 

 

 

 

 

 

Input Cursor

Set File Name

Backspace & Delete 1 Character

5When the file name has been entered as required use the jog dial to highlight the "§" symbol in the lower right corner of the display and press the [OK] button.

The file name will be entered and the save function will be executed.

TENORI-ON Manual 84