Parameter Settings
Setting Parameters with the Jog Dial ■ File Menu
6When the file name has been entered as required use the jog dial to highlight the "§" symbol in the lower right corner of the display and press the [OK] button.
The file name will be entered and the save function will be executed.
A display like the one shown below will appear while the All Settings file is being saved. You can cancel the operation by pressing the [OK] or [CANCEL] button.
Samplings: ∞
Saving... CANCEL
The Samplings file being saved.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the "Saving…" display is showing.
●Sampling file save operations may take a few minutes to complete.
●If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the one shown below will appear.
Samplings: ∞
Already Exists!
Overwrite? OK
●Press the [OK] button if it’s OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the original file unaltered.
7The display shown in step 3, above, will reappear when the operation has finished.
●Rename Samplings
Allows a new name to be entered for a Samplings file on an SD Memory Card.
1Insert the SD Memory Card containing the file you want to rename into the
2Use the jog dial and [OK] button to navigate to the Samplings function menu as follows: "Main menu" ➝ "File menu" ➝ "Samplings"
Samplings: ∞
Operation: Load
3Use the jog dial to highlight the "Rename" function, then press the [OK] button.
Samplings: ∞
Operation: Rename