Parameter Settings
Setting Parameters with the Jog Dial ■ File Menu
5Press the [OK] button to go to the file name entry display. The name of the currently selected All Blocks file will be displayed, and you can enter a new file name as required. File name entry procedure is described in the Rename Song section on Page 65.
●File names can be up to 16 characters in length. The file extension will be added automatically.
Current All Blocks File Name
Available Characters
Input File Name |
| ∞ | |||||
|
| ] |
| ||||
|
|
| |||||
ABCDEFGHIJKLMNOPQRST |
|
| |||||
UVWXYZ- | 0123456789 | ª | § |
| |||
| |||||||
|
|
|
|
|
|
|
|
Input Cursor
Set File Name
Backspace & Delete 1 Character
6When the file name has been entered as required use the jog dial to highlight the "§" symbol in the lower right corner of the display and press the [OK] button.
"Executing …" will appear on the display while the file is being renamed.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the "Executing…" display is showing.
●If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the one shown below will appear.
Blocks: ∞
Already Exists!
Overwrite? OK
●Press the [OK] button if it’s OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the original file unaltered.
7The display shown in step 3, above, will reappear when the operation has finished.
●Delete All Blocks
Deletes a specified All Blocks file from an SD Memory Card.
1Insert the SD Memory Card containing the file you want to delete into the
2Use the jog dial and [OK] button to navigate to the All Blocks function menu as follows: "Main menu" ➝ "File menu" ➝ "All Blocks"
All Blocks | ∞ |
Operation: Load
3Use the jog dial to highlight the "Delete" function, then press the [OK] button.
All Blocks | ∞ |
Operation: Delete