Parameter Settings

Setting Parameters with the Jog Dial ■ File Menu

●Load Samplings

Loads a Samplings file that has been saved to an SD Memory Card into the TENORI-ON.

1

2

Insert the SD Memory Card containing the file you want to load into the TENORI-ON card slot.

Use the jog dial and [OK] button to navigate to the Samplings function menu as follows: "Main menu" ➝ "File menu" ➝ "Samplings"

Samplings: ∞

Operation: Load

3Use the jog dial to highlight the "Load" function, then press the [OK] button.

A display that allows you to specify the user memory to which the loaded sample file will be saved will appear. Use the jog dial to select the desired user memory, then press the [OK] button.

●In this display "User1," "User2," and "User3" correspond to user memory numbers <01/16,> <02/16,> and <03/16.> The bottom line on the LCD displays the name of the sample file currently loaded in that user memory. If the user memory is empty, "--------" will be displayed.

Samplings: Load ∞

Dest.= User1

[1-SAMPLE ]

4Samplings files on the card will appear as a list on the LCD display (with no file extension). Use the jog dial to select the file you want to load.

Samplings: Load ∞

SAMPLE071006-02

SAMPLE071001-01

SAMPLE071013-01

●Only files that are in "tnw" format will be displayed.

5Press the [OK] button to load the selected file.

The display shown below will appear while the file is being loaded. Press the [OK] or [CANCEL] button to cancel the load operation.

Samplings: ∞ "SAMPLE071001-01 "

Loading... CANCEL

The name of the Samplings file being loaded.

●Sampling file load operations may take a few minutes to complete.

6When the Samplings file has been loaded the display shown in step 2, above, will appear.

TENORI-ON Manual 93