Parameter Settings
Setting Parameters with the Jog Dial ■ Edit Menu
1. Copy this Block
Copy this Block | ∞ | |||
Block[01] |
|
|
|
|
|
|
|
| |
Dest. Block: | 02 |
|
| |
Current Block Number (the copy source)
Copy Destination Block Number
Copy all active notes from all layers in the current block to a different block. Specify the destination block number and then press the [OK] button. Press the [CANCEL] button to cancel the copy operation.
■Range . . . . . . . . . . . . 1 — 16
■LED Buttons . . . . . . . The copy destination block number is displayed as illustrated below. The destination block number can also be set via the LED buttons.
2. Clear this Block
Clears all active notes from all layers in the current block.
Rotate the jog dial to display "OK" if it isn’t already showing, then press the [OK] button. To cancel the clear operation either press the [CANCEL] button or rotate the jog dial to display "CANCEL" and press the [OK] button.
●This function clears the active notes, but leaves Random Mode rotation data unaffected and active. The LED buttons can not be used to enter notes while rotation is active. Refer to Rotation (➝ Page 28) for information on stopping rotation.
■Range . . . . . . . . . . . . OK, CANCEL
■Default . . . . . . . . . . . OK
■LED Buttons . . . . . . . Animation displayed when clear executed