Parameter Settings

Setting Parameters with the Jog Dial ■ Play Menu

4. Master Transpose

Master Transpose ∞

+1

Sets transposition for all layers and blocks.

This display also appears when the [R3] button is pressed.

●Changes will not be applied to notes that are already playing in the Push or Solo modes, or currently playing notes if a long Sound length has been specified.

■Range . . . . . . . . . . . . -7 — +8 (semitone increments)

■Default . . . . . . . . . . . 0

■LED Buttons . . . . . . . Values are displayed on the LED button matrix as illustrated below. Adjustments can be made via the LED buttons.

+8 +7 +6 +5 +4 +3 +2 +1

0

-1 -2 -3 -4 -5 -6 -7

The eighth row from the bottom produces no transposition (a "0" setting). Each row above that shifts the pitch up by the corresponding number of semitones up to "+8", while each row below that lowers the pitch by the corresponding number of semitones down to "-7".

[Reference]

❊Function Button [R3] (➝ Page 32)

5.Master Loop Speed

Master Loop Speed ∞

4

Sets the loop speed (the length of each beat) for all layers and blocks.

■Range . . . . . . . . . . . . 1 (quarter note), 2 (eighth note), 4 (sixteenth note), 8 (thirty-second note)

■Default . . . . . . . . . . . 4

■LED Buttons . . . . . . . No display

[Reference]

❊Layer menu/Loop Speed (➝ Page 51)

TENORI-ON Manual 45