Zebra Technologies 7030 Command Code Modes Non-Windows Applications, Basic Character Set

Specifications

Command Code Modes (Non-Windows Applications)

Command Code Modes (Non-Windows Applications)

107

Orientation	Horizontal (Portrait Mode) and 
	Vertical (Landscape Mode)
Number of possible fonts:	8
Font memory	Free memory depends on firmware version, see self-test
	printout
Font technology	Bitmap fonts, non scaleable
Standard fonts	TTP Mono 9, Arial 9, Symbol 9, Wingdings 10, and Code 39
Text attributes	Bold, underline, reverse print, multiple-width, multiple
	height. Attributes can be combined on the same text line.
Logotypes	16 logotypes can be stored in flash memory
Logotype memory	Free memory depends on firmware version, see self-test
	printout

Basic Character Set

The default fonts use Windows code page 1252 Western which contains ISO 8859-1 (ANSI) characters. You can use other character sets by creating and loading appropriate font files.

Characters 0 to 31 are control codes that cannot be changed, but 32 to 255 can be custom designed.

The table below shows the characters stored in flash PROM on the printer control board.

10/05/2009 TTP 7030™ Technical Manual P1003636-002