Zebra Technologies 7030 technical manual Print Commands, Form feed Clear presenter, Run presenter

48

Programming

Print Commands

Print Commands

ESC p

1B 70	Hex
27 112	Decimal

Print

This command makes the printer print the contents of the line buffer. 

Text is converted from text to pixel lines and stored in the line buffer when an LF is received. If the line buffer is empty when <ESC>p is received, nothing is printed.

Text to be printed <LF><ESC>p prints "Text to be printed" on the paper.

Printout is effected automatically at:

Cut	<S> and <ESC><RS>
Form feed	<FF>
Clear presenter	<ENQ>
Run presenter	<ESC><FF><n>
Print buffer full
Press on FF-button

ESC P n1

1B 50 n1	Hex
27 80 n1	decimal

Print Self-test Printout

This command makes the printer generate a self-test page based on the current parameter settings and print that page. The parameter values printed are the ones currently being used. They can differ from Power-ON default values if for example a printout from Windows has been done before <ESC>P is sent to the printer. To make a self test printout with the Power- ON default settings, power up the printer with the Feed button pressed.

n = 0

n = 1

Gives standard self-test printout.

Gives a character set printout using the font selected by parameter p14.

	ESC J n1			Paper Advance*
	1B	4A n1	hex
27		74 n1	decimal

*. DO NOT use ESC J n, ESC j n, or ESC Q n in fixed page mode

The value n represents the number of dot lines the paper is to be transported forwards. Range: 1–255.

A dot line is 0.125 mm, and 255 dot lines equal approximately 32 mm.

P1003636-002 TTP 7030™ Technical Manual 10/05/2009