Zebra Technologies 7030 technical manual 117

Specifications

Part Number List

Figure 27 • Retract and Retain Version

117

36.5

Receipt exit

on same height as normal printer

Exit to

wastebasket

38

All measurements are in mm SW00009

Choose between four modes in the default parameter setup:

1.Retract when new printout is printed.

2.Retract after a preset time.

3.Eject to customer when new printout is printed (wastebasket off).

4.Eject to customer when new printout is printed, but retract if not collected within a preset time.

No additional commands are required.

Note • Use paper rolls with an inner diameter of 40 mm or more when using the "retract and retain" option to prevent the curl in the paper causing a jam in the retract function.

10/05/2009 TTP 7030™ Technical Manual P1003636-002