Zebra Technologies 7030 technical manual Barcode Commands

40

Programming

Barcode Commands

Barcode Commands

TTP 7030 can print EAN 8, EAN 13, EAN128, UPC, 2-of-5 Interleaved, ISBN, Code39 and Code128 barcodes with it’s standard firmware. A special firmware is available where the barcodes are replaced with the PDF 417 2D barcode. See Firmware on page 104, and PDF417 command.

Example • The example below will print an EAN barcode with height = 10 mm, 15 mm in from the right margin.

<ESC>BS<0><0><78><0><0><C><0><50h><0><2>0h> (hex)

<ESC>BW<0>733104000099<0> (hex) <LF>

<RS>

Code 128 / EAN128

The following codes select function codes in Code 128:

Name	Dec	Hex
FNC1	193	C1
FNC2	194	C2
FNC3	195	C3
FNC4	196	C4

P1003636-002 TTP 7030™ Technical Manual 10/05/2009