Zebra Technologies 7030 Determines what should control the page length, Left in the printer

				Default Parameter Settings
				Print Setup
	1	Default
36			Document Mode		DRV
	0	Min
	2	Max

Determines what should control the page length:

79

<ESC>&P<36><0>	Fixed Document Mode. Shorter documents will automatically
	be extended, while longer documents will be divided into
	several pages of the desired length. Page length will be the
	length set by parameters 37 and 38
<ESC>&P<36><1>	Variable Document Mode. The length of the page varies with
	the contents (printouts shorter than the value specified by
	parameters 37 and 38 will be extended to that length)
<ESC>&P<36><2>	Black Mark Mode. Marks on the paper set the form length.
	Minimum one form length is always fed. If a black mark is
	found before that, the printer feeds to the next black mark, then
	cuts and ejects. This ensures that no small paper stripes are cut
	of and left in the printer.

Note • Max page length in Fixed Document Mode is A5-size, which is 148.5 mm.

37 & 38	2 , 88	Default	Page Length	DRV
	2 , 88	Min
	255 , 255	Max

Defines three different things:

1.The minimum length of a page in variable document mode

2.The actual page length in fixed document mode

3.The distance between black marks in black mark mode

One step is 0.125 mm. Settings shorter than 75 mm, will be interpreted as 75 mm. <ESC>&P<37><5><ESC>&P<38><205> Set page length to A5 (148.5 mm)

10/05/2009 TTP 7030™ Technical Manual P1003636-002