Zebra Technologies RW 420 Model UCLI72-4 Quad Charger, Power Supply, Amber, Green Charger Bay

Model UCLI72-4 Quad Charger

The UCLI72-4 Quad Charger is designed to charge up to four RW Series battery packs simultaneously. Batteries must be removed from the printer to be charged in the Quad Charger.

1.Ensure that the charger has been installed properly per the Quad Charger instruction manual. Ensure that the power indicator on the front panel is on.

2.Remove any protective shrink-wrap and labels from all battery packs prior to use. Plug a battery pack into any one of the four charging bays as shown in Figure 6, not- ing the orientation of the battery pack. Slide the battery

pack into the charging bay until it stops. Then rock the battery pack back until it snaps into place. The amber in- dicator directly under the battery being charged will turn on if the battery is properly inserted.

The indicators under the battery will allow you to monitor

Figure 6: UCLI72-4 Quad Charger

Power Supply

1.Slide Battery Pack into Charger Bay

2. Rock Battery Pack into place

Fast
Charge	Full
Fault		Charge

Ready

Amber

LED

Fast
Charge	Full
Fault		Charge
		Ready

Fast Charge Fault

Full Charge

Ready

Fast
Charge	Full
Fault		Charge
		Ready

Green	Charger Bay
LED

Power

Power Indicator

17

RW Series User Guide