Zebra Technologies RW 220 manual Removing the RW 420 from the Cradle

If the charge indicator does not light up, unlatch the printer from the Vehicle Cradle, lift it clear from the Cradle and re-seat it.

Refer to the Vehicle Cradle Installation Guide for more complete information on the power and charge indicators

You can load media (including media from an external sup- ply) and perform cleaning operations normally when the RW 420 Printer is installed in the Cradle .

Removing the RW 420 from the Cradle

Refer to Figure 22.

•Turn the Printer off.

•Push on the latch on the Cradle and rock the top of the printer away from the Cradle.

•Lift the Printer out from the Cradle.

Replace the Docking Connector Cover if you will be us- ing the Printer for an extended period of time away from the Cradle.

Figure 22: Removing the RW 420 from the Cradle

Press the
Latch button
to release the	Rotate the
Printer.	Printer out of
	the Cradle.

Lift the printer free of the retaining pins.

52

RW Series User Guide