Figure 21: Installing the RW 420 into the Cradle
| Remove and retain the | |
| Docking Connector | |
| Cover | |
Charge | Power Indicator | |
Always Green when power is on | ||
Indicator | ||
| ||
| Place the | |
Rock the Printer into | Printer over the | |
retaining pins in | ||
the Cradle to latch it in | ||
the Cradle. | ||
position. | ||
|
•Place the bottom of the printer over the two pins in the Cradle.
•Rock the top of the Printer into the Cradle and press firm- ly until it latches in place.
•Ensure the Cradle power and charge indicators are lit and turn the printer on.
continued
51
