Zebra Technologies RW 420, RW 220 manual Cleaning RW Series Printers

RW Series Cleaning

Area

Method

Interval

	Use a Zebra cleaning pen or 70%
Printhead	isopropyl alcohol on a cotton swab to
	clean the print elements from end to
(Figure 25)
	end (the print elements are located in
	the thin gray line on the printhead).
		After every five rolls of
	Rotate the platen roller and clean it
		media (or more often, if
Platen Roller	thoroughly with the cleaning pen or	needed)
(Figure 25)	70% isopropyl alcohol and a cotton
	swab.
Tear bar	Clean thoroughly with the cleaning
	pen or 70% isopropyl alcohol and a
(Figure 25)
	cotton swab.
Exterior	Water-dampened cloth	As needed
Interior	Brush/air blow. Ensure the Bar	After every five rolls of
	Sensor and Gap Sensor windows are	media (or more often, if
(Figure 25)
	free of dust.	needed)

Figure 25: Cleaning RW Series Printers

RW 420 illustrated	Bar Sensor	Platen Surface
	Printhead
	Elements
Tear Bar	Gap Sensor
	57

RW Series User Guide