Zebra Technologies RW 420, RW 220 manual Compact Flash 802.11b Radio Module

Compact Flash (802.11b) Radio Module

The following section only applies when the CF (Compact Flash) WLAN module (With

FCC ID: I28MD-RW4137) is installed in a RW series printer. The FCC ID number is on the serial number labelonthebackoftheprinterandcanbereadwiththemoduleinstalled.Otherthanconditionsspecified elsewhere in this manual, only one of the radio options can be installed in the printer at one time and the antennausedforthistransmittermustnotbeco-locatedormustnotoperateinconjunctionwithanyother antenna.

Caution • Use of a RW series printer with the radio module marked with “FCC ID: I28MD-RW4137” meets the FCC requirements for radio frequency (RF) radiation exposure in the standard body worn configuration with no minimum separation. In this configuration, which applies whether the belt clip or shoulder strap is used, the face of the printer from which paper is transported is facing away from the user’s body. The standard configuration must always be used when the printer is body worn.

RW 220 printers with this radio option have been SAR tested. The maximum SAR value measured for each model was 0.011527 W/g averaged over 1 gram.

RW 420 printers with this radio option have been SAR tested. The maximum SAR value measured for each model was 0.062 W/kg averaged over 1 gram.

European Regulatory Information for this Radio

AT	BE	CY	CZ	DK
EE	FI	FR	DE	GR
HU	IE	IT	LV	LT
LU	MT	NL	PL	PT
SK	SI	ES	SE	GB

Note: -Member states in the EU with restrictive use for this device are crossed out!

This device is also authorized for use in all EFTA member states (CH, IS, LI, NO)

Important Notice:

This device is a portable RF printer intended for commercial and industrial use in all EU and EFTA member states except in France where restrictive use applies.

35

RW Series User Guide