RW 220 Vehicle Cradle
The RW 220 can be used in conjunction with its own docking Cradle. When the printer is “docked” it can be powered by ei- ther its own battery or one of the RCLI series of external char- gers. Refer to the documentation supplied with the Cradle for more information.
Installing the RW 220 in the Cradle
Refer to Figure 23.
Important • It is recommended as a safety precaution that the adjustable shoulder strap be removed prior to docking the Printer. This precaution ensures the strap will not interfere with proper operation of the vehicle.
•Place the bottom of the printer over the two pins in the Cradle.
•Rock the top of the Printer into the Cradle and press firm- ly until it latches in place.
Figure 23: Installing the RW 220 in the Cradle
| Place the | |
| Printer over the | |
Rock the Printer into | retaining pins in | |
the Cradle. | ||
the Cradle to latch it in | ||
| ||
position. |
| |
| continued | |
| 53 |
