Zebra Technologies RW 420, RW 220 manual Zebra Value Radio, 802.11b

Zebra Value Radio, 802.11b

The following section only applies when the ZebraValue Radio, 802.11b (with FCC ID: I28MD-ZLAN11B) is installed in a RW series printer.The FCC ID number is on the serial number label on the back of the printer and canbe read with the module installed. Otherthan conditions specifiedelsewhere inthis manual, only oneoftheradiooptionscanbeinstalledintheprinteratonetimeandtheantennausedforthesetransmit- ters must not be co-located or must not operate in conjunction with any other antenna.

Caution • The radiated output power of this internal 802.11b radio is far below the FCC radio frequency exposure limits. Nevertheless, this radio must be used in such a manner that the antenna is 2.5 cm. or further from the human body. The radio and antenna are mounted internally in this printer such that when the printer is worn with the back of the printer against the body and the front of the printer (where paper exits) away from the body, then the 2.5 cm distance between the antenna and the users body will be met. Do not use the printer in an unauthorized manner.

European Regulatory Information for this Radio

AT	BE	CY	CZ	DK
EE	FI	FR	DE	GR
HU	IE	IT	LV	LT
LU	MT	NL	PL	PT
SK	SI	ES	SE	GB

Note: -Member states in the EU with restrictive use for this device are crossed out!

This device is also authorized for use in all EFTA member states (CH, IS, LI, NO)

Important Notice:

This device is a portable RF printer intended for commercial and industrial use in all EU and EFTA member states except in France where restrictive use applies.

37

RW Series User Guide