Press | Display Shows | Action/Explanation | |
- | PRINTER READY | Normal printer operation. | |
|
|
| |
|
| Press the BLACK OVAL keys to increase or decrease the print | |
| DARKNESS | darkness setting. (You may need to change this setting when | |
|
| you print your label.) | |
|
|
| |
| PRINT MODE | Press the BLACK OVAL keys to select | |
| or rewind mode. | ||
|
| ||
|
|
| |
|
| Press the BLACK OVAL keys to select continuous or | |
| MEDIA TYPE | ||
| media, you must also include a label length instruction in | ||
|
| ||
|
| your label format.) | |
|
|
| |
|
| Press the BLACK OVAL keys to select transmissive or black | |
| SENSOR TYPE | mark sensing mode. Unless your media has black marks on | |
| the back, leave your printer at the default setting (web). | ||
|
| ||
|
|
| |
| PRINT METHOD | Press the BLACK OVAL keys to select thermal transfer (if you | |
| are using ribbon) or direct thermal (no ribbon). | ||
|
| ||
|
|
| |
| MAXIMUM | Press the BLACK OVAL keys to set the value that is closest to, | |
| LENGTH | but not less than, the length of the label you are using. | |
|
|
| |
|
| Press the BLACK OVAL keys to select: | |
| SAVE SETTINGS | PERMANENT | |
| off. | ||
|
| ||
|
| Press NEXT/SAVE to accept the selection. | |
|
|
| |
- | PRINTER READY | You have exited the configuration mode and are now ready | |
to calibrate the printer. | |||
|
| ||
|
|
|
Many printer settings may also be controlled by your printer’s driver or label preparation software. Refer to the driver or software documentation for more information.
16 | Zebra |