Roll Media Loading

NOTE: A calibration must be performed when media and ribbon (if used) are first installed in the printer, or when a different type of media or ribbon is being used.

Tear-Off Mode

Refer to Figure 16.

1.Open the printhead.

2.Slide the media guide and media supply guide as far from the printer frame as possible. Flip down the media supply guide.

3.Load media as shown.

4.Flip up the media supply guide. Slide in the media guide and media supply guide so they just touch, but not restrict, the edge of the roll.

5.Close the printhead.

Printhead lever

Media

 

Open

supply

guide

 

Media

Closed

Media

 

guide

Figure 16

Zebra XiIII-Series User’s Guide

27