A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label.
Problem | Solution | |
The host is set to EPP parallel | Change the settings on the computer host to standard | |
communications. | parallel communications. | |
|
| |
| Ensure that the flow control settings match. | |
|
| |
The serial communication settings are | Check the communication cable length. See page 22 | |
for requirements. | ||
incorrect. | ||
| ||
Check the printer driver or software communications | ||
| ||
| settings (if applicable). | |
|
|
A label format was sent to the printer but not recognized. The DATA light flashes but no printing occurs.
Problem | Solution | |
The prefix and delimeter characters set | Verify the prefix and delimeter characters. See | |
in the printer do not match the ones in | ||
page 56. | ||
the label format. | ||
| ||
|
| |
Incorrect data is being sent to the | Ensure that ZPL is being used. | |
| ||
Check the communication settings on the computer. | ||
printer. | ||
| Ensure that they match the printer settings. | |
|
|
80 | Zebra |