4.Rotate the platen roller and clean thoroughly with solvent and an applicator.
5.Brush/vacuum any accumulated paper lint and dust away from the rollers.
6.Reload ribbon and/or media, and close and the printhead.
Printhead
lever
Printhead
Black mark sensor
| Ribbon |
| |
| sensor |
| |
Label | Platen | ||
available | |||
roller | bar | ||
sensors | |||
|
|
Figure 27
Cleaning the SensorsThe media, ribbon, and label available sensors should be cleaned on a regular basis to ensure proper operation of the printer. To locate these sensors, refer to Figure 27, Figure 6 on page 11, and Figure 7 on page 12. Brush/vacuum any accumulated paper lint and dust off of these sensors.
Zebra | 67 |