Error Condition Head Open

Problem

Solution

The printhead is not fully closed.

Close the printhead.

 

 

Error Condition Head Element Bad

Problem

Solution

If the failed elements impact your printing application,

One or more of the printhead elements replace the printhead. To override this error, disable have failed the printhead element test. the head test count feature on the front panel by

defaulting the value to “0000.” See page 59.

Warning Ribbon In

Problem

Solution

Remove the ribbon and set the printer to direct thermal

mode.

The ribbon is loaded.

Ensure that the printer driver and/or software settings are correctly set (if applicable).

Warning Head Too Hot

Problem

Solution

Allow the printer to cool. Printing automatically

The printhead is over temperature. resumes when the printhead elements cool to an acceptable operating temperature.

76

Zebra XiIII-Series User’s Guide