Press | Display Shows | Action/Explanation | |
|
| Setting the Applicator Port | Press the RIGHT or LEFT BLACK |
|
| OVAL key to display other choices. | |
|
| Default: Off |
|
|
| Selections: Off, mode 1, mode 2, mode 3, mode 4 | |
|
| Determines the action of the verifier port. | |
|
| • Off: The applicator port is off. |
|
| APPLICATOR | • Mode 1: Asserts the ~END_PRINT signal low while the printer | |
| is moving the label forward. |
| |
| PORT |
| |
| • Mode 2: Asserts the ~END_PRINT signal high while the printer | ||
|
| ||
|
| is moving the label forward. |
|
|
| • Mode 3: Asserts the ~END_PRINT signal low for 20 | |
|
| milliseconds when a label has been completed and positioned. | |
|
| Not asserted during continuous printing modes. | |
|
| • Mode 4: Asserts the ~END_PRINT signal high for 20 | |
|
| milliseconds when a label has been completed and positioned. | |
|
| Not asserted during continuous printing modes. | |
|
|
|
|
| WEB S. |
|
|
|
|
|
|
| MEDIA S. |
|
|
|
|
|
|
| RIBBON S. |
|
|
|
| These parameters are automatically set during the calibration | |
| MARK S. | ||
| procedure. They should only be changed by a qualified service | ||
|
| ||
|
| technician. Refer to the maintenance manual for more | |
|
| ||
|
| information on these parameters. | |
| MARK MED S. | Press the NEXT/SAVE key repeatedly to skip these parameters. | |
|
| ||
|
|
|
|
| MEDIA LED |
|
|
|
|
|
|
| RIBBON LED |
|
|
|
|
|
|
| MARK LED |
|
|
|
|
|
|
60 | Zebra |