Selecting ZPL Mode

 

Press

Display Shows

 

Action/Explanation

 

 

 

 

Selecting ZPL Mode

Press the RIGHT or LEFT BLACK OVAL

 

 

 

 

key to display other choices.

 

 

 

 

Default: ZPL II

 

 

 

 

 

Selections: ZPL II, ZPL

 

 

 

ZPL MODE

The printer will remain in the selected mode until it is changed by

 

 

 

 

this front panel instruction or by using a ZPL/ZPL II command. The

 

 

 

 

printer accepts label formats written in either ZPL or ZPL II. This

 

 

 

 

eliminates the need to rewrite any ZPL formats you already have.

 

 

 

 

Refer to the ZPL II Programming Reference Volumes I and II for

 

 

 

 

more information on the differences between ZPL and ZPL II .

 

 

 

 

 

 

 

 

Power-Up and Head Close Parameters

 

 

 

 

 

 

 

 

 

 

 

Media Power-Up

Press the RIGHT or LEFT BLACK OVAL key

 

 

 

 

to display other choices.

 

 

 

 

Default: Feed

 

 

 

 

 

Selections: Feed, calibration, length, and no motion

 

 

 

MEDIA POWER

This parameter establishes the action of the media when the

 

 

 

UP

printer is turned on.

 

 

•Calibration: Recalibrates the media and ribbon sensors.

•Feed: Feeds the label to the first web.

•Length: Determines the length of the label.

•No Motion: Media does not move.

 

Head Close

Press the RIGHT or LEFT BLACK OVAL key to

 

display other choices.

 

Default: Feed

 

 

Selections: Feed, calibration, length, no motion

HEAD CLOSE

Determines the action of the media after the printhead has been

opened and then closed.

 

•Calibration: Recalibrates the media and ribbon sensors.

•Feed: Feeds the label to the first web.

•Length: Determines the length of the label.

•No Motion: Media does not move.

Zebra XiIII-Series User’s Guide

57