Zebra Technologies XiIII manual 68

Press	Display Shows			Action/Explanation
		IP Resolution	Press the RIGHT or LEFT BLACK OVAL key to
		display other choices.
		Default: Dynamic
	IP RESOLUTION*	Selections: Dynamic, permanent
		Depending on the selection, allows either the user (”permanent”)
		or the server (”dynamic”) to select the IP address. For more
		information, refer to ZebraNet Networking: PrintServer II
		Installation and User’s Guide.
		IP Protocols	Press the RIGHT or LEFT BLACK OVAL key to
		display other choices.
		Default: All
		Selections: All, gleaning only, RARP, BOOTP, DHCP,
	IP PROTOCOLS*	DHCP/BOOTP
		If “dynamic” was chosen in the previous parameter, this selection
		determines the method(s) by which the PrinterServer will receive
		the IP address from the server. For more information, refer to
		ZebraNet Networking: PrintServer II Installation and User’s
		Guide.
		IP Address	Press the LEFT BLACK OVAL key to move to the
		next digit position, press the RIGHT BLACK OVAL key to increase
		the value of the digit.
	IP ADDRESS*	This parameter allows you to select the IP address if “permanent”
		was chosen in “IP RESOLUTION.” (If “dynamic” was chosen, the
		user cannot select the address.) For more information, refer to
		ZebraNet Networking: PrintServer II Installation and User’s
		Guide.
		Subnet Mask	Press the RIGHT or LEFT BLACK OVAL key to
		display other choices.
		Default: Permanent (user must set)
	SUBNET MASK*	Selections: Dynamic (user may set, but server can assign),
		permanent
		This parameter selects the part of the IP address that is
		considered to be part of the local network It can be reached
		without going through the default gateway.
		Default Gateway		Press the LEFT BLACK OVAL key to move
		to the next digit position, press the RIGHT BLACK OVAL key to
	DEFAULT	increase the value of the digit.
	GATEWAY*	This parameter allows you to select the IP address that the
		network traffic is routed through if the destination address is not
		part of the local network.

* Option required

62 Zebra XiIII-Series User’s Guide