Zebra Technologies XiIII manual 60

Press	Display Shows		Action/Explanation
		Setting Parity	Press the RIGHT or LEFT BLACK OVAL key to
		display other choices.
		Default: Even
	PARITY	Selections: Even, odd, none
		The parity of the printer must match the parity of the host for
		accurate communications to take place. Select the parity that
		matches the one being used by the host.
		Setting Stop Bits	Press the RIGHT or LEFT BLACK OVAL key
		to display other choices.
		Default: 1 stop bit
	STOP BITS	Selections: 1 stop bit, 2 stop bits
		The stop bits of the printer must match the stop bits of the host
		for accurate communications to take place. Select the stop bits
		that match the one being used by the host.
		Setting Host Handshake		Press the RIGHT or LEFT BLACK
		OVAL key to display other choices.
	HOST	Default: XON/XOFF
		Selections: XON/XOFF, DTR/DSR
	HANDSHAKE
		The handshake protocol of the printer must match the handshake
		protocol of the host for communications to take place. Select the
		handshake protocol that matches the one being used by the host.
		Setting Protocol	Press the RIGHT or LEFT BLACK OVAL key
		to display other choices.
		Default: None
		Selections: None, Zebra, ACK/NACK
		Protocol is a type of error checking system. Depending on the
	PROTOCOL	selection, an indicator may be sent from the printer to the host
		signifying that data has been received. Select the protocol that is
		requested by the host. Further details on protocol can be found
		in the ZPL II Programming Reference Volumes I and II.
		NOTE: Zebra is the same as ACK/NACK except that with Zebra
		the response messages are sequenced.
		NOTE: If Zebra is selected, printer must use “DTR/DSR” host
		handshake protocol.

54 Zebra XiIII-Series User’s Guide