5.4.1Uptime Command
Syntax:
192.168.1.1> uptime
This command shows the elapsed time the system has been running since the last reboot.
5.4.2Version Command
Syntax:
192.168.1.1> version
This command shows the system firmware version and date
5.4.3Restart Command
Syntax:
192.168.1.1> restart
This command instructs the system to perform a warm start, that is, restarting the system without turning the power off and on.
5.4.4Passwd Command
Syntax:
192.168.1.1> passwd
This command changes the management password. The management password is used for authentication at console or Telnet login. This command is only allowed for local console management sessions. The management password must be from 1 to 8 characters long and any character is accepted. The factory default password is “1234”.
It is very important that you remember your password. If you forget it, refer to the
Troubleshooting section for help.5.4.5Config Print Command
Syntax:
192.168.1.1> config print
This command lists all current system configuration settings.
System Commands |