ZyXEL Communications 1000 10.6.10DVLAN Getentry Command, 10.6.11VLAN List Command, Display a Dynamic VLAN Table Entry Example, Figure 10-6Example: DVLAN List Command Display

IES-1000 User’s Guide

vid	01	02	03	04	05	06	07	08	09
----	----	----	----	----	----	----	----	----	----
2		>>			>>	>>			>>
3	>>	>>				>>	>>	>>
4	>>			>>	>>			>>	>>
5		>>			>>	>>			>>
6	>>	>>				>>	>>	>>
7		>>		>>	>>			>>	>>
8	>>			>>		>>	>>	>>	>>
9		>>				>>		>>	>>

Figure 10-6 Example: DVLAN List Command DisplayIn the figure above, “” denotes “filter” and “>>” denotes “forward”.

10.6.10DVLAN Getentry Command

Syntax:

192.168.1.1 vlan1q> dvlan getentry <vid>

where

<vid> = A VLAN ID. Valid parameter range = [1 – 4094].

This command displays an entry with a specified VLAN ID in dynamic GVRP table.

Display a Dynamic VLAN Table Entry Example

The following figure is an example display of the following command.

192.168.1.1 vlan1q> dvlan getentry 2

vid	01	02	03	04	05	06	07	08	09
----	----	----	----	----	----	----	----	----	----
2		>>			>>	>>			>>

Figure 10-7 Example: DVLAN Getentry 2 Command Display

In the figure above, “” denotes “filter” and “>>” denotes “forward”.

10.6.11VLAN List Command

Syntax:

192.168.1.1 vlan1q> vlan list

This command displays the entire VLAN table. The display refreshes periodically. Press [ENTER] and then enter the stop command to stop the display from refreshing. The following figure is an example what is displayed when you use this command.

10-10 IEEE 802.1QTagged VLAN Commands