ZyXEL Communications 1000 6.6.2Disable Port Command, 6.6.3Disable Ports Command, 6.6.4Enable Port Command, 6.6.5Enable Ports Command

IES-1000 User’s Guide

This command saves the G.SHDSL configuration into nonvolatile memory. You must use this command to save any configurations that you make, otherwise the IES-1000 will return to its default settings when it is restarted.

Do not turn off your IES-1000 while saving your configuration.

6.6.2Disable Port Command

Syntax:

192.168.1.1 gshdsl> disable port <port #>

where
<port #> =	A port number, from 1 to 8

This command forcibly disables the specified G.SHDSL port.

The factory default of all ports is disabled. A port must be enabled before data transmission can occur. An enabled but disconnected SHDSL port generates more heat than an operating port. To minimize heat generation and to enhance reliability, remember to disable a port when it is not in use.

6.6.3Disable Ports Command

Syntax:

192.168.1.1 gshdsl> disable ports

This command forcibly disables all G.SHDSL ports.

6.6.4Enable Port Command

Syntax:

192.168.1.1 gshdsl> enable port <port #>

where
<port #> =	A port number, from 1 to 8

This command forcibly enables the specified G.SHDSL port.

6.6.5Enable Ports Command

Syntax:

192.168.1.1 gshdsl> enable ports

This command forcibly enables all G.SHDSL ports.

G.SHDSL Commands 6-3