ZyXEL Communications 1000 12.2.11Enable Command, telnet session to the new IP address in order to reconnect

<i/f> = [mtu <size>] =

IES-1000 User’s Guide

12.2.11Enable Command

Your telnet session disconnects when you change the Ethernet port’s IP address. Initiate a

telnet session to the new IP address in order to reconnect.

Syntax:

192.168.1.1 ip> enable [<i/f> [mtu <size>] [<IPaddr>]]

where

The name of an interface (“ether” for this device).

Maximum Transmit Unit. The maximum packet size that this interface is to send.

<IPaddr> = The IP address of the device’s interface.

This command sets the Ethernet port’s IP address and the largest packet size that this interface sends.

IP Commands 12-5