9.4.2MAC filter Enable Command
Syntax:
192.168.1.1 bridge> macfilter enable [<port>]
where |
|
<port> = | A bridge port number. |
This command enables the MAC filtering feature on a specific port or on all ports if no port is specified.
9.4.3MAC filter Disable Command
Syntax:
192.168.1.1 bridge> macfilter disable [<port>]
where |
|
<port> = | A bridge port number. |
This command disables the MAC filtering feature on a specific port or on all ports if no port is specified.
9.4.4MAC filter Add Command
Syntax:
192.168.1.1 bridge> macfilter add <port> <mac>
where |
|
|
<port> | = | A bridge port number. |
<mac> | = | The source MAC address in "00:a0:c5:12:34:56" format. |
This command adds a source MAC address fixed on a specified port. You may add up to five MAC addresses.
9.4.5MAC filter Delete Command
Syntax:
192.168.1.1 bridge> macfilter delete <port> <mac>
where |
|
|
<port> | = | A bridge port number. |
<mac> | = | The source MAC address in "00:a0:c5:12:34:56" format. |
This command removes a configured source MAC address from a port specified by you.
Bridge Commands |