gshdsl7: DEFVAL
gshdsl8: DEFVAL
This display shows that there are two profiles (DEFVAL and debug) and that port 3 belongs to the debug profile while ports 1, 2, 4, 5, 6, 7 and 8 belong to the DEFVAL profile.
6.6.13Show Profile Command
Syntax:
192.168.1.1 gshdsl> show profile <name>
where
<name> = A profile name.
The show profile command displays the settings of a G.SHDSL profile.
An example is shown next.
192.168.1.1 gshdsl> show profile debug
profile name _ _ _ Cmin _ Cmax _
Debug | = 192 2048 |
This display shows that the debug profile’s maximum transmission rate is set to 2048 Kbps and the minimum transmission rate is set to 192 Kbps.
6.6.14Show Profiles Command
Syntax:
192.168.1.1 gshdsl> show profiles
The show profiles command displays the settings of all the G.SHDSL profiles.
6.6.15Set Port Command
Syntax:
192.168.1.1 gshdsl> set port <port #> <profile name>
where |
|
|
<port #> | = | The number of the port to which you want to assign a profile. |
<profile name> = | The profile that defines the minimum and maximum transfer rates for this | |
|
| port. |
Enter the list ports command to view the status of all ports.
G.SHDSL Commands |