7.5.10List Port Command
Syntax:
192.168.1.1 adsl> list port <port number>
where
<port number> = A port number, from 1 to 8.
The list port command shows the configured maximum upstream/downstream rates, the mode (or standard), and enable/disable state of an individual ADSL port.
7.5.11List Ports Command
Syntax:
192.168.1.1 adsl> list ports
The list ports command shows the configured maximum rates, modes and states of all ADSL ports.
7.5.12Set Profile Command
Syntax:
192.168.1.1 adsl> set profile <name> <atur max rate > <atuc max rate> [<atur
...> <atuc ...>]
<atux ...> = <target margin> <min margin> <max margin> <min rate>
where |
|
|
|
<name> | = | The name of the profile (up to 32 characters). | |
<atur max rate> | = | The maximum ADSL upstream transmission rate. | |
<atuc max rate> | = | The maximum ADSL downstream transmission rate. | |
<atur target margin> = | The target ADSL upstream signal/noise margin | ||
<atuc target margin> = | The target ADSL downstream signal/noise margin | ||
<atur min margin> | = | The minimum acceptable ADSL upstream signal/noise margin (0- | |
|
| 31db). | |
<atuc min margin> | = | The minimum acceptable ADSL downstream signal/noise margin (0- | |
|
| 31db). | |
<atur max margin> | = | The maximum acceptable ADSL upstream signal/noise margin (0- | |
|
| 31db). | |
<atuc max margin> | = | The maximum acceptable ADSL downstream signal/noise margin (0- | |
|
| 31db). | |
<atur min rate> | = | The minimum ADSL upstream transmission rate in Kbps. | |
<atuc min rate> | = | The minimum ADSL downstream transmission rate in Kbps. | |
|
|
| |
| ADSL Commands |
| |