IES-1000 User’s Guide

This command sets the VLAN ID to a specific port in the PVID table. To display the PVID table simply enter this command without parameters, as shown next.

192.168.1.1 vlan1q> pvid

pvid

port#

-----

-----

1

1

1

2

1

3

1

4

1

5

1

6

1

7

18

19

192.168.1.1 vlan1q>

Figure 10-1 Example: PVID Command DisplayMake sure you set all bonded ports to have the same PVID.

10.6.4SVLAN CPU Command

Syntax:

192.168.1.1 vlan1q> svlan cpu [<vid>]

where

<vid> = A VLAN ID. Valid parameter range = [1 – 4094].

This command registers your CPU as a port member of the static VLAN with <vid>. To display the CPU static VLAN identification, simply enter this command without parameters, as shown next.

192.168.1.1 vlan1q> svlan cpu

10.6.5SVLAN List Command

Syntax:

192.168.1.1 vlan1q> svlan list

IEEE 802.1Q Tagged VLAN Commands

10-5